Ikelite TT5 Canon TTL Fiber Optic Transmitter for DL and DLM Underwater Housings

Ikelite TTL exposure algorithms for underwater strobes have been famous for accuracy since the dawn of digital. You can enjoy the most reliable Canon TTL strobe exposure with a fiber optic connection between your Ikelite housing and DS strobes.

Replace your Ikelite flash bulkhead or 1/2-20 accessory port plug with this compact, independently sealed device for reliable fiber optic triggering of an Ikelite DS Strobe (requires RC2 TTL Receiver). High frame rate burst shooting is supported when used with an Ikelite DS160-series or DS230-series strobe.

The TT5 supports rear curtain sync and switching between TTL and manual strobe exposure using the camera's flash menu.

The transmitter is powered by two CR2032 lithium single-use or rechargeable batteries (not included). It has a built-in power save mode, which prolongs battery life. Expect at least a week of diving out with average use. It is always recommended that you travel with a spare set of batteries.

Housing Compatibility

• All Ikelite 200DL Underwater Housings for Canon cameras
• All Ikelite 50DL Underwater Housings for Canon cameras
• Ikelite 200DLM Underwater Housings with an electrical bulkhead or 1/2-20 threaded accessory port EXCEPT for Canon 250D Rebel SL3 # 6970.08
• Not designed for use with other manufacturers' housings

Strobe Compatibility

Fiber Optic Cord Compatibility:

Backscatter Universal Fiber Optic Cable

Ikelite Fiber Optic Coiled Cord # 4501

INON Optical D Cable L-Connector

SEA&SEA Fiber Optic Cable II

Strobe Compatibility:

Each strobe must have an RC2 TTL Receiver # 4412 attached. The RC2 and TT5 are only compatible with the following Ikelite DS strobes:

• Ikelite DS50 above serial # 70000
• Ikelite D51
• Ikelite DS125 above serial # 5000
• Ikelite DS160, DS161, DS162
• Ikelite DS200 above serial # 7163
• Ikelite DS230, DS232

This product is not compatible with non-digital Ikelite strobes, SEA&SEA, INON, or other non-Ikelite strobes.

In The Box

• TT5 Canon TTL Transmitter
• TTL Hotshoe
• Battery holder
• * requires 2 x CR2032 batteries not included