Ikelite RC2 TTL Receiver for DS Strobes

Convert your Ikelite DS strobe's electrical bulkhead to a fiber optic connection with compatible Ikelite TTL Fiber Optic Transmitters.

Each strobe requires an individual RC2 TTL Receiver and compatible fiber optic cord. Using two strobes requires two receivers. This product attaches to an Ikelite DS strobe. It is not intended to be attached to a housing. It will provide no functionality if attached to a housing bulkhead. This receiver is not compatible with non-Ikelite strobes or non-digital Ikelite strobes.

Manual Strobe Exposure

The strobe's output may be adjusted using the manual power settings built into the strobe (they vary by model). Make sure the camera's flash mode is set to manual. Choose the minimum flash output necessary to trigger the DS strobe. This will conserve the camera's battery power.

Camera Housing Compatibility

Ikelite Housing Models with TT5 Canon TTL Transmitter # 44701 installed.

Strobe & Cord Compatibility:

• Fiber Optic Cord Compatibility:
• Ikelite Fiber Optic Coiled Cord # 4501
• INON Optical D Cable "Non-wireless type" L-Connector
• SEA&SEA Fiber Optic Cable (L-type) # 50107
• SEA&SEA Fiber Optic Cable II # 50128
• Olympus UW Fiber Optic Cable PTCB-E02
• Nauticam Optical Fiber Cable # 26211 Nauticam to INON
• Nauticam Optical Fiber Cable # 26212 Nauticam to Sea&Sea

Consult with your housing manufacturer for information on what type of fitting is provided at the housing end. The fiber optic ports on Ikelite housings are made to the same standard as those on the SEA&SEA and Olympus brands.

Strobe Compatibility:

• Ikelite DS50 above serial # 70000
• Ikelite D51
• Ikelite DS125 above serial # 5000
• Ikelite DS160, DS161, DS162
• Ikelite DS200 above serial # 7163
• Ikelite DS230, DS232

This product is not compatible with non-digital Ikelite strobes, SEA&SEA, INON, or other non-Ikelite strobes.

In The Box

• TTL receiver
• Connector protector
• Silicone lubricant 1cc tube