Sea & Sea MDX-D7100 Underwater Housing for Nikon D7100 & D7200 DSLR Cameras

Sea & Sea MDX-D7100 Underwater Housing for Nikon D7100 & D7200 DSLR Cameras

SEA&SEA's announces the MDX-D7100 DSLR housing for the popular Nikon D7100 camera. The MDX-D7100 is part of SEA&SEA's latest housing series which is precision machined from solid block aluminum and designed for ultimate performance and ergonomics.

Features
Optical YS Converter N can be built into the housing
Compatible with new Optical YS Converter N (#50126) which converts the cameras TTL signal to a light signal. Both TTL and manual strobe photography is possible using a fiber-optic cable.

Compatible with both the VF180 1.2x and VF45 1.2x viewfinders
By attaching the VF180 (#46112) or the VF45 prism viewfinders (#46111) (magnification ratio of 1.2x) to the housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.
* You may encounter some difficulties to access the info button function if VF45 1.2x is installed on the housing. To avoid this problem, manufacturer suggests using VF180 1.2x instead.

Port can be replaced without opening the housing
Port lock can be now activated from outside the housing. The housing is also equipped with a lens-lock release button which allows the lens to be replaced without opening the housing. The port lock can also be activated from inside like previous SEA&SEA housings.

• Equipped with two fiber-optic cable sockets. With the camera's built-in flash raised and fiber-optic cables fitted, external strobes can be triggered as slave units by the built-in flash.
• Every detail of the housing is precision machined. The housing is protected by a highly corrosion resistant anodized coating. All edges have been polished carefully for perfection.
• Controls all the Nikon D7100 essential functions underwater.
• (Bracketing button, preview button and function button are not operable from the housing) .
• The multi selector (which is often used underwater) is the same design as the camera control and can be operated in the same way. AF areas and Focus points can be changed by depressing the selector. The multi selector control is located so that it is accessible with your hand on the grip.
• The camera's built-in flash can be activated and deactivated from the housing. (When the accessory light-shielding plate is fixed, this function cannot be used).
• Equipped with Accessory Port which can be used for HDMI output.
• The grip design has been significantly improved with the travelling diver in mind. The grips are mounted with threadless fixings to facilitate easy transportation, mounting and removal of the grips. The new design also alleviates corrosion build up around the fittings. All fixings are available as spare parts.
• Fitted with a tripod socket on the centre underside of the housing.
• Equipped with the Optical Viewfinder 0.5x as standard. Other (optional) interchangeable viewfinders can be used.
• The quick shoe makes the camera easy to install and remove from the housing.
• Built-in leak sensor immediately alerts you to water ingress.
• Depth rating of 100m / 330ft makes the housing ideal for tech diving.

Specifications

• [Construction]
• Body: corrosion-resistant aluminum alloy (machined)
• Grip: corrosion-resistant die-cast aluminum alloy
• [Depth rating] 100m / 330ft
• [Dimensions (WxHxD)] 341 x 192 x 136mm / 13.4 x 7.6 x 5.4 inches
• [Weight] Approx. 2,700g / 94.5oz.(Housing only)